- #SETTING UP MACS FAN CONTROL FOR PERFORMANCE FOR MAC#
- #SETTING UP MACS FAN CONTROL FOR PERFORMANCE INSTALL#
- #SETTING UP MACS FAN CONTROL FOR PERFORMANCE FULL#
- #SETTING UP MACS FAN CONTROL FOR PERFORMANCE PRO#
I did a test recording with OBS and after 10 minutes, the temperatures remained below 70 degrees celsius, which is great. In those cases, bumping the speed manually between 3500-3800rpms is the sweet spot between keeping the temperatures down, and the noise under control. I've noticed that below 2500rpms the fans are almost impossible to hear, but obviously at that speed their not able to keep temperatures down if you're running heavy tasks at the same time. Macs Fan Control is a free program that allows you to set the speed of the fans in your mac manually. This encoder should be better optimized for Macs as I've noticed a slight reduction in fan noise, although I might say that the generated files are twice as large (around 120MB per 5 minutes instead of 40MB using the default h264 software encoder).
In OBS, go to Preferences > Output > Select Output Mode Advanced and in the recording tab, choose the Apple VT H264 Hardware Encoder. I do however enable it whenever I need to export a video for example. Not to mention that it will also increase your battery life. Disabling Turbo Boost will have an impact on performance, but for everyday use and some tasks, like recoding with OBS, I think it's worth it.
#SETTING UP MACS FAN CONTROL FOR PERFORMANCE INSTALL#
Just install it, and disable turbo boost using the icon in the top bar. But there is a tool that allows you to disable the Turbo Boost in the processor, and that's Turbo Boost Switcher.
#SETTING UP MACS FAN CONTROL FOR PERFORMANCE PRO#
My Macbook Pro 16 has an Intel i9 with 8 cores, and an AMD 5500M graphics card and when both are operating at its peak they generate a lot of heat. So I decided to search a little bit and found a few tricks and configurations that, when combined, gave me very good results.
#SETTING UP MACS FAN CONTROL FOR PERFORMANCE FULL#
Take note you are limited to the minimum value that Apple sets, so you can’t damage your hardware.I've been using Zoom + OBS to record my meeting in full HD and the combination of both resulted in the fans going crazy, to the point that you can actually hear them during the video.
#SETTING UP MACS FAN CONTROL FOR PERFORMANCE FOR MAC#
If you’re having a noise problem, you can lower this value, but make sure you keep an eye on the temperatures. Could you tell me what are the best settings for Mac fans control on MacBook Pro Thank you. Once it hits the high threshold the MBP will give it everything it has to cool the book down. As the book gets hotter the machine adds more fan speed to cool down. I am only enabling/changing Speed Shift, settings things to a maximum of 3GHz (clock speed before turbo boost is 2. Right fan: set to custom -> Sensor Based -> 5500M -> ramp up from 45C to 80C. This fan control tool has been used for years to set a minimum rpm value for the built-in fans. below the lower threshold the fans will stay at base rate. Left fan: set to custom -> Sensor Based -> CPU Proximity -> ramp up from 45C to 80C. Also, it’s free, so it’s worth trying it out before buying a premium app. When all fans are controlled automatically by the system the app works in monitoring-only mode. Auto: a fan is controlled by the system automatically (Apple's default scenario). Keep in mind that it won’t work on the new M1 Macs, but it should be compatible with the Intel builds. Fan control for your fan(s) on your Apple computer can be either.
In computers, various types of computer fans are used to provide adequate cooling. Instead, it uses the hard disk’s integrated SMART interface to get the data it needs. Fan control is the management of the rotational speed of an electric fan. The best thing about HDD Fan Control is that it doesn’t rely on Apple’s temperature sensors.
0 kommentar(er)
